Skip to content

Propeller

Prop Analysis and Replacement – Part III: The Second Axiom Prop

  • by

We hauled out on July 21st, hoping to “haul and hang” for an hour to pull off the old Axiom and put on the new one, but with the nagging fear in the back of our minds that we should have replaced the white metal bearing during our haul out in June.

Prop Analysis and Replacement – Part I

  • by

Rainshadow has a 16 inch diameter, 12 inch pitch propeller that is specified by Camper and Nicholson for the Nic 38.  It sits in an aperture, which is about 20 inches in diameter.  She also has the original Perkins 4-108 with a 2:1 reduction transmission.  We find there are three major problems.

Survey Haulout

  • by

We had Rainshadow hauled out for the pre-purchase survey so the surveyor could inspect the hull and rudder. This gave us a good chance to look at her bottom sides, and figure out where all…